The technician’s tool for installing and troubleshooting Ethernet devices.
MicroScanner™ PoE finds common wiring errors and switch power capacity. Cables often fail in harsh industrial environments where cables are exposed to vibration, extreme flexing, moisture, expansion, and contraction from temperature change.
Failures result in costly production downtime so it is important to quickly identify where the cable is broken so it can be replaced or repaired. MicroScanner™ PoE performs continuity tests on all wires in a few seconds and displays results graphically so one can see opens, shorts, and cross wires.
It also reports which end of the cable has a problem and reports the distance to an open connection within the cable.
The MicroScanner™ PoE also allows for easy installation / maintenance on IT, security, PoE lighting, Ethernet based HVAC devices, and IP based building automation systems.
Troubleshoot quickly and easily with the oversized backlit LCD screen that displays clear results in bright light or complete dark with intuitive icons, and support of Class 1 through to class 8 PoE.
MicroScanner ™ PoE Capabilities:
• Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
• Ethernet Alliance Certified to IEEE-802.3™ standards for reliable multivendor interoperability
• Information for the Network Engineer to investigate potential switch configuration or malfunctions.
• PoE Switch Verification — Determine if a switch port can provide enough power by reporting PoE class (0-8).
• Powered Pairs —Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
• Active Switch Detection – Determine if a cable is connected to a switch port and port speed up to 10G
• Cable Testing — Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.
• Validate and troubleshoot your Industrial Ethernet copper cabling
• PoE Injector Verification – Display injector voltage level
Key features:
• Save time by locating faults in 2 or 4 pair cables running EtherNet/IP, PROFINET, MODBUS, and other Ethernet protocols in 4 seconds;
• Diagnoses of the most common faults displayed on the large backlit screen;
• Identify exactly where the fault is in metres or feet.
• Find unmarked cables with built in tone generator (probe included with MS-POE-KIT model).
For More Details Please Contact
www.flukenetworks.com
India-marketing@flukenetworks.com
