“KUSAM-MECO” DIN RAIL MOUNTING POWER METER MODEL KM-CPM-12D

KUSAM-MECO has added a New TRMS Multifunction Power Meter
Transducer to its range of Power instruments. KM-CPM-12D is a
DIN Rail Mounting Power Meter with high accuracy measurement
for single phase & three phase system. The display is 128 x 64 dot
matrix LCD display with white backlight. It is controlled by 4
operating keys. Input Voltages are 40 ~ 400V (line to Neutral).
60 ~ 600V (Line to Line). PT primary ratio 100 ~ 1200KV Secondary
Ratio 50 ~ 500V. CT Input 1A or 5A or 1/5A programmable. It can
accept external current clamps which have secondary 1A or 5A or
333mV output. CT Primary programmable 1 to 9999 Amps.
It measures all power parameters such as Voltage (Phase-Neutral) (Phase-Phase) & Avg. voltage,
Current (each Phase & Avg.) Active Power (each Phase & Sum), Reactive Power (each Phase &
Sum), Apparent Power (each Phase & Sum), Power Factor (each phase & Average), Frequency,
Active Energy (Import & Export), Total Energy, Net Energy, Reactive Energy, (Import & Export),
Total & Net; THD% Voltage 31st THD each phase, Average; THD/ Current 31st THD each phase,
Average. Voltage & Current Phase or diagram, Demand, Maximum Demand of Current & Power
with time stamp. Min / Max values with time stamp, Data logging with recording interval can be
set. 50 of 88 parameters can be recorded simultaneously. It has RS485 port to transmit data in
Modbus RTU mode. It has function to calculate CO2(kg). For energy output it gives pulse output.
It has optional feature to record time of use data(4 seasons, 8 tariff settings per day, per year or
upto 5years. For DG Sets it can also record operation hour, Run hour. It has a fast sampling rate
of 128 point / cycle. It can be used for 1P2W, 1P3W, 3P3W (1/2/3 CT) 3P4W
Balance/unbalanced load. 247 units can be connected to RS485 Modbus RTU. It has 2MB flash
ROM.